1. with universal AC input / full range
2. protection: short circuit / overload / over voltage / over temperature
3. can be installed on DIN rail TS-35/7.5 or TS-35/15
4. industrial control equipment (UL 508) approved
5. EN61000-6-2(EN50082-2) industrial immunity level
6. 100% full load burn-in test
7. for professional use only
8. This device must be installed by a qualified person.

1. output:
   1. DC voltage: 24 V
   2. rated current: 5 A
   3. current range: 0 - 5 A
   4. rated power: 120 W
   5. ripple and noise (max.): 120 mVp-p
   6. voltage adj. range: 24 - 28 V
   7. voltage tolerance: +/- 1.0%
   8. line regulation: +/- 0.5%
   9. load regulation: +/- 1.0%
   10. setup, rise time:
       1. 1200 ms, 60 ms / 230 VAC
       2. full load: 2500 ms, 60 ms / 115 VAC
   11. hold up time:
       1. 16 ms / 230 VAC
       2. full load: 10 ms / 115 VAC
   12. input:
       1. voltage range:
          1. 90-264 VAC
          2. 127-370 VDC
          3. DC input operation possible by connecting AC/L(+), AC/N(-)
       2. frequency range: 47 - 63 Hz
       3. efficiency : 88%
       4. AC current:
          1. 2.25 A / 115 VAC
          2. 1.3 A / 230 VAC
       5. inrush current:
          1. 20 A / 115 VAC
          2. 35 A / 230 VAC
       6. leakage cureent: <1 mA / 240 VAC
   13. protection:
       1. overload:
          1. 105 - 130% rated output power
          2. constant current limiting, recovers automatically after fault condition is removed
       2. over voltage:
          1. 29-33 V
          2. shut down o/p voltage, re-power on to recover
       3. over temperature: shut down o/p voltage, re-power on to recover
   14. environment:
       1. working temperature: -20 to +70 °C
       2. working humidity: 20-95% RH non-condensing
       3. storage temperature: -40 to +85 °C
       4. storage humidity: 10-95% RH
       5. temp. coefficient: +/- 0.03%/°C (0-50°C)
       6. vibration:
          1. component: 10-500 Hz, 2G 10 min. / 1 cycle, 60 min. each along X, Y, Z axes
          2. mounting: compliance to IEC60068-2-6
       7. safety and EMC:
          1. safety standards: UL508, TUV EN60950-1 approved
          2. withstand voltage:
             1. I/P-O/P: 3000 VAC
             2. I/P-FG: 2000 VAC
             3. O/P-FG: 500 VAC
          3. isolation resistance: I/P-O/P, I/P-FG, O/P-FG:>100M Ohm / 500 VDC / 25 °C / 70% RH
          4. EMC emissions: compliance to EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
          5. EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A
       8. MTBF: 456.300 hrs min. MIL-HDBK-217F (25 °C)
       9. dimensions (W x H x D): 40 x 125.2 x 113.5 mm

ndr-120.pdf

powersupplya4v04.pdf