1. constant voltage mode power supply
2. universal AC input / full range
3. resists 300 VAC surge input for 5 seconds
4. protections: short circuit / overload / over voltage
5. cooling by free air convection
6. compact size
7. fully isolated plastic case
8. IP30 design
9. pass LPS
10. suitable for LED lighting and moving sign applications
11. low cost, high reliability
12. 100% full load burn-in test
13. 2 years warranty
14. for professional use only
15. This device must be installed by a qualified person.

1. output:
   1. DC voltage: 5 V
   2. rated current: 5 A
   3. current range: 0-3 A
   4. rated power: 25 W
   5. ripple & noise (max): 120 mVp-p
   6. voltage tolerance: +/- 5.0%
   7. line regulation: +/- 1.0%
   8. load regulation: +/- 2.0%
   9. setup, rise time: 1500 ms, 40 ms / 230 VAC 1500 ms, 40 ms / 115 VAC at full load
   10. hold-up time (typ.): 20 ms / 230 VAC 12 ms / 115 VAC at full load
2. input:
   1. voltage range: 90-264 VAC 127-370 VDC
   2. frequency range: 47-63 Hz
   3. efficiency (typ.): 76.5 %
   4. AC current (typ.): 0.5 A / 230 VAC 0.75 A / 115 VAC
   5. inrush current (max.): cold start 45 A (twidth = 440 µs measured at 50% lpeak) at 230 VAC
   6. leakage current: 0.25 mA / 240 VAC
3. protection:
   1. overload:
      1. 110-160% rated output power
      2. protection type: hiccup mode, recovers automatically after fault condition is removed
   2. overvoltage:
      1. 5.75 - 6.95 V
      2. protection type: shut down output voltage, re-power on to recover
   3. environment:
      1. working temperature: -30 °C to +70 °C
      2. working humidity: 20 - 90% RH non-condensing
      3. storage temperature, humidity: -40°C to +80 °C, 10 to 95% RH
      4. temperature coefficient: +/- 0.03 % / °C (0 to 50 °C)
      5. vibration: 10 - 500 Hz, 2 G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes
   4. safety & EMC:
      1. safety standards: UL8750, CSA-C22.2 No. 250.0-13 approved; design refer to EN60950-1
      2. withstand voltage: input-output: 3000 VAC
      3. solation resistance: input-output: > 100 MOhm; / 500 VDC / 25 °C / 70 % RH
      4. EMC emission: compliance to EN55022, EN61000-3-2 Class A, EN61000-3-3
      5. EMC immunity: compliance to EN55024, EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), criteria A
   5. other:
      1. MTBF: 692.800 hrs min. MIL-HDBK-217F (25°C)
      2. dimensions: 84 x 57 x 29.5 mm

apv-35.pdf

powersupplya4v04.pdf