1. universal AC input / full range (up to 305 VAC)
2. built-in active PFC function
3. constant voltage PWM style output
4. dimming range: 0-100%
5. high efficiency up to 91%
6. protections: short circuit / overload / over-voltage / thermal
7. class II power unit, no FG
8. built-in 2 in 1 dimming function (0-10 VDC or PWM signal)
9. suitable for dry / damp / wet locations
10. no load power consumption: < 0.5 W
11. 5 years warranty

1. output:
   1. DC voltage: 12 V
   2. rated current: 10 A
   3. rated power: 120 W
   4. dimming range : 0-100 %
   5. PWM frequency (typ.): 300 Hz
   6. voltage tolerance: ± 4.0 %
   7. set up, rise time: 500 ms, 80 ms 230 VAC / 115 VAC at full load
   8. hold up time: 16 ms / 230 VAC 16 ms / 115 VAC at full load
2. input:
   1. voltage range: 90-305 VAC; 127-431 VDC
   2. frequency range: 47-63 Hz
   3. power factor: PF > 0.97 / 115 VAC, PF > 0.96 / 230 VAC, PF 0.94 / 277 VAC at full load (please refer to 'power factor characteristic' curve)
   4. total harmonic distortion : THD < 20% when output loading >/= 60 % at 115 VAC / 230 VAC input and output loading >/= 75 % at 277 VAC input
   5. efficiency: 89%
   6. AC current: 1.3 A / 115 VAC 0.65 A / 230 VAC 0.55 A / 277 VAC
   7. inrush current: cold start 60 A (twidth = 550 µs measured at 50 % Ipeak) at 230 VAC
   8. leakage current: < 0.25 mA / 277 VAC
3. protection:
   1. overload:
      1. 108-120 % rated output power
      2. protection type: hiccup mode, recovers automatically after fault condition is removed
   2. over voltage:
      1. 15-17 V
      2. protection type: shut down o/p voltage, re-power on to recover
   3. thermal: shut down o/p voltage, re-power on to recover
4. environment:
   1. working temperature: -40 to +70°C (refer to 'derating curve')
   2. working humidity: 20-95 % RH non-condensing
   3. storage temperature, humidity: -40 = + 80 °C, 10-95 % RH
   4. temperature coefficient: ± 0.03 % / °C (0-50 °C)
   5. vibration: 10-500 Hz, 5 G 12min / 1 cycle, period for 72 min each along X, Y, Z axes
5. safety & EMC:
   1. safety standards: UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent IP67 approved; design refer to EN60335-1
   2. withstand voltage: input to output: 3.75 kVAC
   3. isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH
   4. EMC emission: compliance to EN55015, EN61000-3-2 Class C (>= 60 % load); EN61000-3-3
   5. EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN61547 light industry level (surge L-N: 2 kV), criteria A
6. other:
   1. MTBF: MIL-HDBK-217F (25 °C)
   2. dimensions: 191 x 63 x 37.5 mm

pwm-120.pdf

meanwell-warranty-e.pdf

powersupplya4v04.pdf