VELLEMAN CATALOG
-
SWITCHING POWER SUPPLY - SINGLE OUTPUT - 150 W - 24 V - 3Y
Код товара:
ELG-150-24A-3Y
Описание:
Features:- constant voltage + constant current mode output
- metal housing design with functional ground
- : built-in active PFC function
- class 2 power unit
- no load / standby power consumption <0.5W
- IP65 rating for indoor or outdoor installations
- function options: Io and Vo adjustable through built-in potentiometer
- typical lifetime > 50.000 hours
- 5 years warranty
- for professional use only
- This device must be installed by a qualified person.
- output:
- DC voltage: 24 V
- constant current region : 12 V - 24 V
- rated current: 6.254 A
- rated power: 150 W (200 V~ to 305 V~), 105 W (100 V~ to 180 V~)
- ripple & noise (max.): 200 mVp-p
- voltage adj. range: 21.6 V - 26.4 V
- current adj. range: 3.2 A - 6.25 A
- voltage tolerance: ± 3.0 %
- line regulation: ± 0.5 %
- load regulation: ± 1.0 %
- setup, rise time : 1600 ms, 80 ms / 115 V~, 500 ms, 100ms / 230 V~
- hold-up time (typ.): 10 ms / 115 V~, 230 V~
- input:
- voltage range: 100-305 V~ 142-431 VDC
- frequency range: 47 to 63 Hz
- power factor: PF >/= 0.97 / 115 V~, PF >/= 0.95 / 230 V~, PF >/= 0.92 / 227 V~ at full load
- total harmonic distortion: THD < 20% (@load >/= 50% / 115 V~, @load >/= 60% / 230 V~; @load >/= 75% / 277 V~)
- efficiency (typ.): 89 %
- AC current: 1.7 A / 115 V~, 0.9 A / 230 V~, 0.7 A / 227 V~
- inrush current (typ.): cold start 65 A / 230 V~
- max. PSUs on 16A circuit braker: 3 units (circuit braker type B) / 6 units (circuit braker type C) at 230 V~
- leakage current: < 0.75 mA / 277 V~
- no load / standby power consumption: < 0.5 W
- wiring type: 3-wire input
- protection:
- overcurrent :
- 95 to 108 %
- protection type: constant current limiting, recovers automatically after fault condition is removed
- short-circuit: hiccup mode, recovers automatically after fault condition is removed
- overvoltage:
- 28 V - 34 V
- protection type: shut down output voltage, re-power on to recover
- overtemperature: shut down output voltage, re-power on to recover
- overcurrent :
- environment:
- working temperature: -40 °C to +90 °C
- max. case temperature: +90 °C
- working humidity: 20 - 95% RH non-condensing
- storage temperature, humidity: -40 °C - +80 °C, 10 - 95 % RH
- temperature coefficient: ± 0.03 % / °C (0 °C to 60 °C)
- vibration: 10 to 500 Hz, 5 G 12 min. / 1 cycle, period for 72 min. each along X, Y, Z axes
- safety & EMC:
- safety standards: UL8750 (type "HL"), CSA C22.2 no. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.14,GB19510.1; IP65 approved
- withstand voltage: I/P-O/P: 3.75K V~, I/P-FG: 2.0K V~, O/P-FG: 1.5K V~
- isolation resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohm / 500 VDC / 25 °C / 70 % RH
- EMC emission: compliance to EN55015, EN61000-3-2 Class C (@load >/=50%); EN61000-3-3; GB17625.1,GB17743
- EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)
- others:
- MTBF: 899.8K hrs min.; Telcordia SR-332 (Bellcore) ; 313.66Khrs min.; MIL-HDBK-217F (25 °C)
- dimensions: 219 x 63 x 35.5 mm (L x W x H)
Documents:По ЗаказуЦена с НСО
97.68 €