1. Universal AC input / Full range
2. Built in active PFC function
3. Protections: Short circuit / Overload / Over voltage / Over temperature
4. Cooling by free air convection
5. Can be installed on DIN rail TS-35/7.5 or 15
6. UL 508(industrial control equipment)approved
7. LED indicator for power on
8. 100% full load burn-in test
9. Fixed switching frequency at 100KHz
10. 3 years warranty
11. for professional use only
12. This device must be installed by a qualified person.

1. OUTPUT:
   1. DC VOLTAGE: 24V
   2. RATED CURRENT: 10A
   3. CURRENT RANGE: 0 ~ 10A
   4. RATED POWER: 240W
   5. RIPPLE & NOISE (max.) Note.2: 80mVp-p
   6. VOLTAGE ADJ. RANGE: 24 ~ 28V
   7. VOLTAGE TOLERANCE Note.3: ±1.0%
   8. LINE REGULATION: ±0.5%
   9. LOAD REGULATION: ±1.0%
   10. SETUP, RISE TIME: 800ms, 40ms/230VAC 800ms, 40ms/115VAC at full load
   11. HOLD UP TIME (Typ.): 24ms/230VAC 24ms/115VAC at full load
2. INPUT:
   1. VOLTAGE RANGE: 85-264VAC; 120-370VDC
   2. FREQUENCY RANGE: 47 ~ 63Hz
   3. POWER FACTOR (Typ.): 0.96/230VAC 0.99/115VAC at full load
   4. EFFICIENCY (Typ.): 84%
   5. AC CURRENT (Typ.): 2.8A/115VAC 1.4A/230VAC
   6. INRUSH CURRENT (Typ.): COLD START 27A/115VAC 45A/230VAC
   7. LEAKAGE CURRENT: <3.5mA / 240VAC
3. PROTECTION:
   1. OVERLOAD:
      1. 105 ~ 150% rated output power
      2. Protection type : Constant current limiting, recovers automatically after fault condition is removed
   2. OVER VOLTAGE:
      1. 30 ~ 36V
      2. Protection type : Shut down o/p voltage, re-power on to recover
   3. OVER TEMPERATURE:
      1. 100°C ±5°C (TSW1)detect on heat sink of power transistor
      2. Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
   4. ENVIRONMENT:
      1. WORKING TEMP.: -10 ~ +70°C (Refer to "Derating Curve")
      2. WORKING HUMIDITY: 20 ~ 90% RH non-condensing
      3. STORAGE TEMP., HUMIDITY: -20 ~ +85°C , 10 ~ 95% RH
      4. TEMP. COEFFICIENT: ±0.03%/ (0 ~ 50°C)
      5. VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
   5. SAFETY & EMC (Note 4):
      1. SAFETY STANDARDS: UL508, UL60950-1, TUV EN60950-1 approved
      2. WITHSTAND VOLTAGE: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
      3. ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
      4. EMC EMISSION: Compliance to EN55011,EN55022 (CISPR22) Class B, EN61000-3-2,-3
      5. EMC IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
   6. OTHERS:
      1. MTBF: 289.9Khrs min. MIL-HDBK-217F (25°C )
      2. dimensions: 125.5 x 125.2 x 100mm
      3. PACKING: 1.2Kg; 12pcs/15.5Kg/1.29CUFT

drp-240.pdf

powersupplya4v04.pdf