1. Constant voltage mode power supply
2. Universal AC input / Full range
3. Withstand 300VAC surge input for 5 seconds
4. Protections: Short circuit / Overload / Over voltage
5. Cooling by free air convection
6. Small and compact size
7. Fully isolated plastic case
8. IP30 design
9. Pass LPS
10. Suitable for LED lighting and moving sign applications (Note.8)
11. Low cost, high reliability
12. 100% full load burn-in test
13. 2 years warranty
14. for professional use only
15. This device must be installed by a qualified person.

1. OUTPUT:
   1. DC VOLTAGE: 12V
   2. RATED CURRENT: 3A
   3. CURRENT RANGE: 0~3A
   4. RATED POWER : 36W
   5. RIPPLE & NOISE (max) Note. 2: 150mVp-p
   6. VOLTAGE TOLERANCE Note.3: +/-5.0%
   7. LINE REGULATION: +/-1.0%
   8. LOAD REGULATION: +/-2.0%
   9. SETUP, RISE TIME Note.6: 1500ms, 40ms / 230VAC 1500ms,40ms / 115VAC at full load
   10. HOLD UP TIME (Typ.): 20ms/230VAC 12ms/115VAC at full load
2. INPUT:
   1. VOLTAGE RANGE: 90~264VAC 127~370VDC
   2. FREQUENCY RANGE: 47~63Hz
   3. EFFICIENCY (Typ.): 83%
   4. AC CURRENT (Typ.): 0.5A/230VAC 0.75A/115VAC
   5. INRUSH CURRENT(max.): COLD START 45A (twidth=440µs measured at 50% lpeak) at 230VAC
   6. LEAKAGE CURRENT: 0.25mA/240VAC
3. PROTECTION:
   1. OVERLOAD:
      1. 110~160% rated output power
      2. Protection type : Hiccup mode, recovers automatically after fault condition is removed
   2. OVER VOLTAGE:
      1. 13.8~16.2V
      2. Protection type : Shut down o/p voltage, re-power on to recover
   3. ENVIRONMENT:
      1. WORKING TEMP.: -30~70°C (referring to" Derating curve")
      2. WORKING HUMIDITY: 20 ~ 90% RH non-condensing
      3. STORAGE TEMP., HUMIDITY: -40 ~ +80°C, 10 ~ 95% RH
      4. TEMP. COEFFICIENT: +/-0.03%/°C(0 ~ 50°C)
      5. VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
   4. SAFETY & EMC:
      1. SAFETY STANDARDS: UL8750 , CSA-C22.2 No. 250.0-13 approved; design refer to EN60950-1
      2. WITHSTAND VOLTAGE: I/P-O/P:3KVAC
      3. SOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25°C/ 70% RH
      4. EMC EMISSION: Compliance to EN55022,EN61000-3-2 Class A,EN61000-3-3
      5. EMC IMMUNITY: Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A
   5. OTHERS:
      1. MTBF: 692.8K hrs min. MIL-HDBK-217F (25°C)
      2. dimensions: 84 x 57 x 29.5mm
      3. PACKING: 0.18Kg; 72pcs / 14Kg/ 0.92CUFT

apv-35.pdf

powersupplya4v04.pdf