1. universal AC input / full range
2. protection against: short circuit / overload / overvoltage
3. cooling: free air convection
4. can be installed on DIN rail TS-35/7.5 or 15
5. UL 508 (industrial control equipment) approved
6. isolation class II
7. LED indicator for power on
8. 100 % full load burn-in test
9. 3 years warranty
10. for professional use only
11. This device must be installed by a qualified person.

1. output:
   1. DC voltage: 12 V
   2. rated current: 4.5 A
   3. current range: 0-4.5 A
   4. rated power: 54 W
   5. ripple & noise (max.): 120 mVp-p
   6. voltage adj. range: 11.1-13.2 V
   7. voltage tolerance: ± 1.0 %
   8. line regulation: ± 1.0 %
   9. load regulation: ± 1.0 %
   10. setup, rise time: 100 ms, 30 ms / 230 VAC 200 ms, 30 ms / 115 VAC at full load
   11. hold up time (typ.): 100 ms / 230 VAC 23 ms / 115 VAC at full load
2. input:
   1. voltage range: 88-264 VAC 124-370 VDC
   2. frequency range: 47-63 Hz
   3. efficiency (typ.): 82 %
   4. AC current (typ.): 1.2 A / 115 VAC 0.8 A / 230 VAC
   5. inrush current (typ.): cold start 18 A / 115 VAC 36 A / 230 VAC
3. protection:
   1. overload:
      1. 105-160 % rated output power
      2. protection type: constant current limiting, recovers automatically after fault condition is removed
   2. overvoltage:
      1. 13.8-16.2 V
      2. protection type: shut down output voltage, re-power on to recover
   3. environment:
      1. operating temperature: -20 to +60 °C
      2. operating humidity: 20-90 % RH non-condensing
      3. storage: -40 to +85 °C, 10-95 % RH
      4. temperature coefficient: ± 0.03 %/°C (0-50 °C)
      5. vibration: 10-500 Hz, 2G 10min/1cycle, period for 60 min each along X, Y, Z axes; mounting: compliance to IEC60068-2-6
   4. safety & EMC:
      1. safety standards: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
      2. withstand voltage: input to output: 3 kVAC
      3. isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH
      4. EMC emission: compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
      5. EMC immunity: compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
   5. others:
      1. MTBF: min. 216,200 h, MIL-HDBK-217F (25 °C )
      2. dimensions: 78 x 93 x 56 mm
      3. packing: 0.3 kg; 48 pcs / 15.4 kg / 1.02 ft³

dr-60.pdf

powersupplya4v04.pdf