Viimati lisatud

Prindi

  • AC-DC MULTI-STAGE DIMMABLE with DALI LED DRIVER - CONSTANT CURRENT - 40 W - SELECTABLE OUTPUT CURRENT WITH PFC

    Tootekood:

    LCM-40DA

    Kirjeldus:

    Features:
    1. constant Current mode output with multiple levels selectable by dip switch
    2. plastic housing with class II design
    3. built-in active PFC function
    4. standby power consumption < 0.5 W
    5. functions:
      1. DALI interface (logarithm or linear dimming curve selectable)
      2. push dimming
      3. synchronization up to 10 units
    6. 3 years warranty
    7. current level selectable via DIP switch
    Specifications:
    1. output:
      1. selectable current: 350 mA / 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA
      2. DC voltage range: 2-100 V / 2-80 V / 2-67 V / 2-57 V / 2-45 V / 2-40 V
      3. rated power: 42 W
      4. open circuit voltage: 110 V
      5. current ripple: ± 5.0 % max. at rated current
      6. current tolerance: ± 5 %
      7. auxiliary DC output: nominal 12 V (deviation 11.4 ~ 12.6 V) at 50 mA for AUX-Type only
      8. setup time: 500 ms / 230 VAC
    2. input:
      1. voltage range: 180-295 VAC 254-417 VDC
      2. frequency range: 47-63 Hz
      3. power factor (typ.): >= 0.975 / 230 VAC; >= 0.96 / 277 VAC at full load
      4. total harmonic distortion: lower than 20 % when output load is 75 % or higher
      5. efficiency (typ.): 91 %
      6. AC current (typ.): 0.23 A / 230 VAC; 0.2 A / 277 VAC
      7. inrush current (typ.): cold start 20 A (twidth = 260 µs measured at 50 % Ipeak) at 230 VAC
      8. leakage current: < 0.5 mA / 240 VAC
      9. standby power consumtion: < 0.5 W for Blank-Type, < 1.2 W for AUX-Type
    3. protection:
      1. short circuit: constant current limiting, recovers automatically after fault condition is removed
      2. overvoltage:
        1. 110-130 V
        2. protection type: shut down output voltage, re-power on to recover
      3. over-temperature: shut down output voltage, re-power on to recover
    4. functionality:
      1. temperature compensation: by external NTC thermistor (not provided with the power supply)
      2. dimming
      3. synchronization
    5. environment:
      1. operating temperature: -30 to +90 °C
      2. max. case temperature: +90 °C
      3. operating humidity: 20-90 % RH non-condensing
      4. storage temperature, humidity: -40 to +80 °C, 10-95 % RH
      5. temperature coefficient: ± 0.03 %/°C (0-50 °C)
      6. vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes
    6. safety & EMC:
      1. safety standards: UL8750, CSA C22.2 No.250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved, GB 19510.1, BIS IS15885, EAC TP TC 004 approved
      2. DALI standards: comply with IEC62386-101, 102, 207
      3. withstand voltage: input to output: 3.75 kVAC
      4. isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH
      5. EMC emission: compliance to EN55015, EN61000-3-2 Class C (>= 40 % rated power); EN61000-3-3, GB17625.1, GB17743, EAC TP TC 020
      6. EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN61547 light industry level (surge 2 kV), EAC TP TC 020
    7. others:
      1. MTBF: 193.6K hrs min. MIL-HDBK-217F (25 °C)
      2. dimensions (L x W x H): 123.5 x 81.5 x 23 mm
      3. packing: 0.24 kg; 54 pcs / 15 kg / 1.12 ft³
    Dokumendid:
    Tellimisel

    Hind km-ga:

    96.95 €