Latest products
-
AC-DC SINGLE OUTPUT LED DRIVER WITH PFC - 3 WIRE INPUT - ADJUST WITH POTMETER
Product code:
ELG-240-24B-3Y
Description:
Features:- constant voltage + constant current mode output
- metal housing design
- : built-in active PFC function
- no load / standby power consumption <0.5W
- IP67 rating for indoor or outdoor installations
- 3-in-1 dimming function (0~10 VDC, 10 V PWM signal and resistance)
- typical lifetime > 50.000 hours
- 5 years warranty
- with build-in earth wire
- 3 in 1 dimming function (0 ~ 10 Vdc, 10 V PWM signal and resistance)
- for professional use only
- This device must be installed by a qualified person.
- output:
- DC voltage: 24 V
- constant current region : 12 V to 24 V
- rated current: 10 A
- rated power: 240 W (200 VAC to 305 VAC), 180 W (100 VAC to 180 VAC)
- ripple & noise (max.): 200 mVp-p
- voltage adj. range: 22.4 V to 25.6 V
- current adj. range: 5 A to 10 A
- voltage tolerance: ± 2.0 %
- line regulation: ± 0.5 %
- load regulation: ± 0.5 %
- setup, rise time : 500 ms, 100 ms / 230 VAC, 1000 ms / 115 VAC
- hold-up time (typ.): 10 ms / 230 VAC, 10 ms / 115 VAC
- input:
- voltage range: 180-295 VAC 255-417 VDC
- frequency range: 47 to 63 Hz
- power factor: PF >/= 0.97 / 115 VAC, PF >/= 0.95 / 230 VAC, PF >/= 0.92 / 227 VAC at full load
- total harmonic distortion: THD < 20%
- efficiency (typ.): 92 %
- AC current: 2.2 A / 115 VAC, 1.5 A / 230 VAC, 1.2 A / 227 VAC
- inrush current (typ.): cold start 75 A / 230 VAC
- max. PSUs on 16A circuit braker: 4 units (circuit braker type B) / 6 units (circuit braker type C) at 230 VAC
- leakage current: < 0.75 mA / 277 VAC
- protection:
- overcurrent :
- 95 to 108 %
- protection type: constant current limiting, recovers automatically after fault condition is removed
- short-circuit: hiccup mode, recovers automatically after fault condition is removed
- overvoltage:
- 27 V to 34 V
- protection type: shut down output voltage, re-power on to recover
- overtemperature: shut down output voltage, re-power on to recover
- overcurrent :
- environment:
- working temperature: -40 °C to +70 °C
- working humidity: 20 to 95 % RH non-condensing
- storage temperature, humidity: -40 °C to +80 °C, 10 to 95 % RH
- temperature coefficient: ± 0.03 % / °C (0 °C to 50 °C)
- vibration: 10 to 500 Hz, 5 G 12 min. / 1 cycle, period for 72 min. each along X, Y, Z axes
- safety & EMC:
- safety standards: UL8750 (type "HL"), EN61347-1, EN61347-2-13 independent, IP65 or IP67 approved
- withstand voltage: I/P-O/P: 3.75K VAC, I/P-FG: 2.0K VAC, O/P-FG: 1.5K VAC
- isolation resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohm / 500 VDC / 25 °C / 70 % RH
- EMC emission: compliance to EN55015, EN61000-3-2 Class C (@load >/=50%); EN61000-3-3;
- EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)
- others:
- MTBF: 826.7K hrs min.; Telcordia SR-332 (Bellcore) ; 200.8Khrs min.; MIL-HDBK-217F (25 °C)
- dimensions: 244 x 63 x 35.5 mm
- packing: 1.22 kg; 12 pcs / 15.2 kg / 0.72 CUFT
- input wiring type: 3-wire input for standard model
Documents:On orderPrice (VAT included):
132.11 €