Test & Measurements
-
200 A / 2000 A (high amps) DC current clamp
Product code:
TA167
Description:The 200 A / 2000 A current clamp allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope.
The TA167 features a 200 A mode for better performance at lower currents and has an increased jaw size. It also features an auto power-down facility to save battery life when not in use (this feature can be disabled for battery drain / shutdown current testing).
specification:
Nominal current : 2000 A AC pk max. or DC
Overload capacity : 2200 A (60 s)
Output sensitivity : 10 mV/A and 1 mV/A switchable
Accuracy1) (0 to 200 A of 10 mV/A): ± 1% of reading ± 100 mA
Accuracy1) (0 to 1500 A of 1 mV/A): ± 1% of reading ± 500 mA
Accuracy1) (1500 to 2000 A of 1 mV/A): ± 5% of reading
Gain variation: ±0.15% of reading/°C
Frequency range: DC to 20 kHz (-1 dB); iRMS x f ≤ 400,000
Power supply: 9 V alkaline battery PP3, MN 1604 or IEC6LR61
Load impedance (minimum): > 100 kΩ and ≤ 100 pF
Conductor size: 32 mm diameter
Output cable and connectors: 2 m long coax terminated with safety BNC connector
Operating temperature: 0°C to +50°COn orderPrice (VAT included):
331.78 €
