1. universal AC Input 90 - 264 V~
2. constant current operation
3. fully isolated plastic case with IP65
4. built-in constant current limiting design
5. operation from -10 °C - 40 °C
6. protections: OVP / OLP / SCP
7. class II power design without earth pin
8. for high brightness light-emitting diode products

1. output:
   1. LED operation voltage: 3 - 21 VDC
   2. rated current range: 700 mA ± 6 %
   3. rated max. power: 9 W
   4. efficiency (typ.) 230 V AC: 75 %
   5. rise time: < 250 ms at full load
2. input:
   1. voltage range: 90 V~ - 264 V~
   2. frequency range: 47 Hz - 63 Hz
   3. AC current: 0.2 A at 115 V~ / 0.1 A at 230 V~
   4. inrush current: no components will be stressed over its max specification according to I2T
   5. leakage current: < 0.25 mA / 240 V~
3. protections:
   1. over load: 100 - 135 % rated output power; recovers automatically after fault condition has been removed
   2. short circuit: type: Hiccup mode, recovers automatically after fault condition is removed
   3. over voltage: 105-120% rated output voltage
4. environment:
   1. operation temp.: -10 - 40 °C full load
   2. operation humidity: 20% - 95% RH non-condensing
   3. storage temp.: -20 - +80 °C
   4. storage humidity: 10% - 95% RH
   5. vibration: 10 - 500 Hz, 2G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes
5. safety & EMC:
   1. safety standards: meet EN61347-1, EN61347-2-13, IP65 approved
   2. withstand voltage: meet I/P - O/P: 3.75 K V~
   3. isolation resistance: meet > 100 M ohms / 500 VDC at 25 °C
   4. EMI conduction & radiation: meet EN55015
   5. harmonic current: compliance to EN61000-3-2 Class C, EN61000-3-3
   6. EMS immunity: meet EN61547, EN61000-4-2, 3, 4, 5, 6, 8, 11
6. others:
   1. MTBF: 400K hours min. MIL-HDBK-217F (25 °C)
   2. dimension (L x W x H): 73.5 x 35 x 23 mm
   3. weight: 97.4 g

gp-lcxxxx-02.pdf

powersupplya4v04.pdf