Vandal resistant keypad with RFID for access control using the Velbus domotics system
Features:

1. designed to be used with the Velbus domotics system
2. vandal-resistant die-cast zinc alloy protection bracket for surface mounting
3. faceplate material: stainless steel
4. back-lit keypad (blue light) with metal keys and selectable light duration (on-10s-off)
5. standby LED and 2 user channel status LEDs on the front
6. built-in tamper detection
7. weatherproof (IP65)
8. 2 separate user channels with max. 1,000 users for controlling channel 1 and max. 100 users for channel 2
9. 50 visitor codes for temporary workers and visitors, for one time use or which expire after a programmable time of 1-99 hours
10. 4-8 digit user codes, RFID cards or fobs, or combination of the two for different security levels
11. advanced possibilities using Velbus configuration:
    1. channel inhibition during certain periods and/or activated by Velbus buttons, sensors,...
    2. configure a Velbus button as egress button, for opening the door without using codes or cards (e.g. for a button inside the building)
12. additional functionality using inputs/outputs that are not connected to the Velbus system (if needed these can be connected using Velbus input and output modules):
    1. input for sensing the door position: e.g. by directly connecting a normally closed magnetic door switch (used for warning beeps when the door remains open, advanced security access, …)
    2. egress input: for opening the door without using codes or cards, eg. using a button inside the building directly wired to the keypad
    3. duress output: when entering the duress code, the user channels will be operated just like a normal code, but additionally the duress output (open collector) will be closed, eg. for triggering a silent alarm when someone is forced to operate the keypad
    4. alarm output (open collector): closes when the door is forced open or opened after the egress delay (configurable 1-99 seconds)
13. compatible with : 125 kHz Manchester 64-bit EM4100 & EM4200 EM cards and keyfobs
14. CAN terminator switch with state detection
15. 8 Velbus channels: 2 user channels, tamper alarm, 5 virtual buttons
16. uses one Velbus address (configurable in VelbusLink)
17. extensive day, week and year programs plus a built-in astronomical clock (sunrise and sunset timing) are included to operate, lock and unlock the channels automatically (configurable in VelbusLink)

Specifications:

1. dimensions (H x W x D): 144 x 78 x 32 mm
2. supply voltage: 15 ±3 VDC
3. current consumption: 130 mA max.
4. weight: 400 g
5. Velbus bus connector cross section (solid wire): 0.5 - 1.5 mm²
6. mounting screws, wall plugs and 2 RFID cards included
7. operating conditions: -20 to +70°C
8. protection rating: IP65
9. delays for code entry and card reading: 10 seconds max. delay for next digit entry; 30 seconds max. delay for code entry after card reading
10. address range: 1-250
11. number of channels: 8
12. number of program steps: 70 max.
13. storage conditions: -20 to +70°C, 5-95% relative humidity non-condensing
14. housing: die-cast zinc alloy protection bracket
15. faceplate material: stainless steel
16. max. transmitted power: < -57 dBm

vmbkp_datasheet.pdf

pn-vmbkp-ed1.pdf

vmbkp-manual-ed2-a4-en.pdf

vmbkp_datasheet.pdf

velbuslink-latest.exe

guide_velbus_01_hardware_en.pdf

guide_velbus_02_configuration_en.pdf

velbus-troubleshooting-guide-en.pdf

guide_velbus_actions_by_module_en.html

velbuslink-10.9.7.0.exe

velbus_verbruikscalculator_en.xlsx