1. constant voltage design
2. 180-305 VAC input only
3. fully encapsulated, IP67
4. class II power unit, no FG
5. protection against: short circuit / overload / overvoltage / over temperature
6. fully isolated plastic case
7. cooling: free air convection
8. 100 % full load burn-in test
9. low cost / high reliability
10. suitable for LED lighting and moving sign applications
11. suitable for use in dry, damp and wet locations
12. 2 years warranty
13. short circuit protection
14. overload protection
15. over voltage protection (255V)
16. thermal protection (80°)
17. waterproof protection IP67

1. output:
   1. DC voltage: 12 V
   2. rated current: 10 A
   3. current range: 0-10 A
   4. rated power: 120 W
   5. ripple & noise (max): 200 mVp-p
   6. voltage tolerance: ± 5.0 %
   7. line regulation: ± 1.0 %
   8. load regulation: ± 2.0 %
   9. setup, rise time: 500 ms, 50 ms / 230 VAC 500 ms, 50 ms / 277 VAC
   10. hold up time (typ.): 18 ms / 230 VAC 20 ms / 277 VAC at full load
2. input:
   1. voltage range: 180-305 VAC 254-431 VDC
   2. frequency range: 47-63 Hz
   3. efficiency (typ.): 87 %
   4. AC current (typ.): 1.7 A / 230 VAC 1.5 A / 277 VAC
   5. inrush current (max.): cold start 60 A (twidth = 900 µs measured at 50 % lpeak) at 230 VAC
   6. leakage current: 0.25 mA / 240 VAC
3. protection:
   1. overload:
      1. 110-150 % rated output power
      2. protection type: hiccup mode, recovers automatically after fault condition is removed
   2. overvoltage:
      1. 13.5-17 V
      2. protection type: shut down output voltage, re-power on to recover
   3. over temperature: shut down o/p voltage, recovers automatically after temperature goes down
4. environment:
   1. operating temperature: -25 to 65 °C
   2. operating humidity: 20-90 % RH non-condensing
   3. storage: -40 to +80 °C, 10-95 % RH
   4. temperature coefficient: ± 0.03 % / °C (0-50 °C)
   5. vibration: 10-500 Hz, 2G 10 min / 1 cycle, period for 60 min each along X, Y, Z axes
5. safety & EMC:
   1. safety standards: IP67 approved; design refer to TUV EN60950-1
   2. withstand voltage: input to output: 3 kVAC
   3. isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH
   4. EMC emission: compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A (< or = 80% load), EN61000-3-3
   5. EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
6. other:
   1. MTBF: min. 703,000 h, MIL-HDBK-217F (25 °C)
   2. dimensions (L x W x H): 191 x 63 x 37.5 mm
   3. packing: 0.74 kg; 20 pcs / 15.8 kg / 0.95 ft³
7. housing: aluminium
8. connection: leads
9. protection class: IP67
10. storage temperature: -40°C ~ 80°C
11. operating temperature: -25°C ~ 50°C

lpv-150.pdf

powersupplya4v04.pdf